Shengzhen Nie 2024-06-01 11:05:03

SupplyHeight 50mm 75mm 100mm 150mm 200mm PP/PE plastic honeycomb geogrid cell
High strength honeycomb restraint system, PE/PP plastic geocell,

It is made of elongated plastic sheets processed by ultrasonic welding technology,

After unfolding, a honeycomb shaped three-dimensional grid is presented,

The width of the long plastic sheet is the height of the geogrid cell,

When the geogrid chamber is not unfolded,

On the same side of the same sheet,

The distance between adjacent welds is the welding distance of the geogrid cell, abbreviated as the welding distance,

There are 5 different heights of plastic geogrids

50mm, 75mm, 100mm, 150mm, 200mm

There are 9 types of welding distances for plastic geogrids

330mm, 356mm, 400mm, 450mm, 500mm

600mm, 660mm, 712mm, 800mm

There are three standards for plastic geogrid chambers

Standard Non Standard

National standard

American Standard

There are two types of plastic geogrid chambers

Polypropylene Geogrid Room - PP Plastic Geogrid Room

Polyethylene geocell PE plastic geocell


There are two main technical indicators for plastic geogrid chamber: The tensile yield strength of the cell sheet Mpa PP ≥ 23.0 PE ≥ 20.0

2: Welding tensile strength N/cm PP ≥ 100 PE ≥ 100