SupplyCarbide Rods Polished
1 With Ultra-fine grain size, strictly technological control, extrusion molding,HIP sintering.
2 HIP Sintering,which greatly reduces the porosity, improves the compactness, and greatly improves the mechanical properties of the product.
3 Wear resistance, high strength, impact resistance, stable performance, long working life.
4 Carbide rods Widely used for processing into endmill, drills, and stamping 5 dies,To Cut steel parts of HR5/55/65 degrees.
Diameter:Φ3-32mm
Length:330mm
ground carbide rod or unground carbide rods
Procelain Drill bits
The Drill bits are drilling holes on the porcelain,ceramic,marbel,millor etc,with water colded,can drill 8holes at least.
Top:with tungsten carbide
Shank: 45#steel
good weld and finish
It needs be used on a hand electric drill. When drilling, to be positioned before starting the machine. Also needs to be continuously cooled by adding water during drilling. The size of 6-8mm, with drilling speed 2300-2700/S; for 10-12mm, the speed need 2000-2200/S. The drilling force should be even ,and wear protective equipment to ensure safe production.
Carbide Saw tip widely used for cutting various of wood,aluminium.
2 Easily weld,no creacking,high wear resistance ,Long working Life.
Author
Login/Regsiter